| Case description: | This section describes possible faults and recommended actions for each fault when the external device is connected abnormally. | |
| Result: | The Robot disconnected to the external camera, PC, communication connection device , the port position light is not bright or only the monochrome light (orange or green). note: Need to use the port beside USB port of robot. | |
| Possible reason: | The following are possible symptoms about electric control box which cannot be connect to another equipment:
1)The connection wire for the robot & external devices is loose. 2)Incorrect Network IP address for external devices. 3)HMI’s IP address is different with External devices. 4)NIC driver abnormal 5)IPC or NIC abnormal |
Common error code
NA |
