Skip to content
카테고리:
Tool_Tool Changer

OnRobot

Dual Quick Changer

제품 특징

  • Dual gripper speeds cycle time and can improve productivity by 50% or more.
  • The new Dual Quick Changer enables you to use our end-of-arm tools together in a single cycle. With this innovative solution you can use two RG2 grippers or an RG6 gripper with a VG10 – it’s entirely up to you. Quickly and seamlessly switch between OnRobot tools to maximize the utilization of your robots with the Dual Quick Changer.
  • The Dual Quick Changer has built-in electric feed-through for OnRobot tools. You can connect various tools. You can even use a Quick Changer Tool Side if you wish to use a non-OnRobot tool as well.

 

OnRobot’s TM ROBOT support Page.

Technical data Min Typical Max
Permissible force* [N] 400*
Permissible torque* [Nm] 50*
Rated payload* [kg] [lbs] – – – – 20*44*
Repeatability [mm] ±0.02
IP Classification 64
Operating life (Tool change) [cycles] 5.000
Operating life (Robot operation) [M cycles] 10
No data was found

암 모델

하드웨어

소프트웨어

Mech Mind 用户手册 Mech Mind DOCS