{"id":116183,"date":"2024-08-15T16:04:32","date_gmt":"2024-08-15T08:04:32","guid":{"rendered":"https:\/\/www.tm-robot.com\/?post_type=docs&p=116183"},"modified":"2025-06-20T10:14:44","modified_gmt":"2025-06-20T02:14:44","slug":"introduction-of-quick-start-of-palletizing-application-project","status":"publish","type":"docs","link":"https:\/\/www.tm-robot.com.cn\/en\/docs\/introduction-of-quick-start-of-palletizing-application-project\/","title":{"rendered":"Introduction of Quick Start of Palletizing Application Project"},"content":{"rendered":"
Examples are valid for:<\/p>\n
TMflow Software version: 2.18 or above.<\/p>\n
TM Robot Hardware version: HW3.2 or above<\/p>\n
Note that older or newer software versions may have different results.<\/p>\n
The \u201cQuick Start of Palletizing application project\u201d is a simple project for you to quickly start your first palletizing application with just few steps and some necessary configuration, e.g. vacuum suction.<\/p>\n
This project is programmed specifically by TECHMAN Robot to help you quickly set up and run a modularized single-form box palletizing project. You can customize or replace peripheral hardware and, with a few simple settings, start palletizing single-form boxes.<\/p>\n
In the \u201cQuick Start of Palletizing application project\u201d, which is changeable and can be modified according to your specific environment and setup. The application project TECHMAN provided is using a TM25S robot as an example, it explains how to install the robot and its end effector. You can choose the equipment that best suits your palletizing needs.<\/p>\n
Refer to the above figure, the robot will start from P0, goes to P1 and pick up the box, goes to P2-P3 then P4-P5-P6 for approaching and put the box. After finish releasing the box, goes up to P7, then P3 and goes back to P0 again for next pick.<\/p>\n <\/p>\n For more details about the software and manuals of Quick Start of Palletizing application project, please visit the TECHMAN download center<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":" Examples are valid for: TMflow Software version: 2.18 or above. TM Robot Hardware version: HW3.2 or above Note that older or newer software versions may have different results. The \u201cQuick Start of Palletizing application project\u201d is a simple project for you to quickly start your first palletizing application with just few steps and some necessary […]<\/p>\n","protected":false},"author":8760,"featured_media":0,"parent":0,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"doc_category":[4590],"doc_tag":[],"acf":[],"yoast_head":"\n
<\/a><\/p>\n
<\/a><\/p>\n
<\/a><\/p>\nMore Details…<\/h1>\n